Study on effective mobility control time ramge and influencing factors of polymer flooding

SHI Leiting; ZHU Shijie; ZOU Jian; XUE Xinsheng; ZHAO Wensen; YE Zhongbin

doi:10.13809/j.cnki.cn32-1825/te.2019.04.006

Views : 0 下载量: 283 CSCD: 1 CNKI被引量: 7 Scopus: 0 更多指标

PDF
Export
Share
Collection
Album

Study on effective mobility control time ramge and influencing factors of polymer flooding
Issue 4, Pages: 31-35+46(2019)
Published：2019
DOI： 10.13809/j.cnki.cn32-1825/te.2019.04.006
稿件说明：

移动端阅览

DOI：

SHI Leiting, ZHU Shijie, ZOU Jian, et al. Study on effective mobility control time ramge and influencing factors of polymer flooding[J]. Petroleum Reservoir Evaluation and Development, 2019, (4): 31-35+46. DOI： 10.13809/j.cnki.cn32-1825/te.2019.04.006.

摘要

研究聚合物驱有效控制时间范围及其影响因素

有利于聚合物驱后进一步提高采收率措施的开展。结合水驱油藏的特征曲线理论和聚合物驱流度控制作用机理建立了判断方法

并通过室内驱油实验进行了影响因素的分析。结果表明

聚驱前后的水驱特征曲线存在一定的差异。随着后续水驱过程的进行

其水驱规律会逐渐回归到聚合物驱前的原有规律

将聚合物驱前后水驱特征曲线规律的一致性作为判断聚合物驱有效流度控制范围的方法是可行的。增加聚合物溶液黏度对其流度控制时间的影响相对较小

仅有10-2数量级注入PV量的影响;增加残余阻力系数能大幅度延长聚合物驱的有效流度控制时间

达到10-1数量级注入PV量的影响。聚合物的残余阻力系数是影响有效流度控制时间范围的主要因素。

Abstract

The study on the effective control time range of polymer flooding and its influencing factors is conducive to the further development of oil recovery measures after polymer flooding. Based on the theory of characteristic curve of water flooding reservoir and the mobility controlling mechanism of polymer flooding

a judgment method was established

and the influencing factors were analyzed through the indoor flooding experiments. The results showed that there were some differences in the water flooding characteristic curves before and after polymer flooding. With the follow-up process of water flooding

its rule would gradually return to the original rule before polymer

flooding. It was feasible to judge the effective mobility control range of polymer flooding by the consistency of the characteristic curve of water flooding before and after polymer flooding. The effect of increasing the viscosity of polymer solution on its mobility control time was relatively small

only 10

-2

order of magnitude of PV injection. Increasing the residual resistance factor（RRF） could significantly prolong the effective mobility control time of polymer flooding

and reached 10

-1

order of magnitude of PV injection. The residual resistance coefficient of polymer is the main factor affecting the effective mobility control time.

关键词

Keywords

references

闻一平.不同代数树枝聚合物建立残余阻力系数的能力研究[D].西南石油大学,2015(05).

孙晨.提高海上稠油油藏早期注聚效果研究[D].西南石油大学,2012(03).

郭智栋.基于高残余阻力系数的高渗透稠油油藏聚合物驱驱替液技术[D].西南石油大学,2011(08).

叶仲斌等, 编.提高采收率原理[M].石油工业出版社,2007.

吴海俊,付美龙,孙晶,廖月敏,张瑶.稠油油藏三元复合驱参数优化实验研究[J].特种油气藏,2018(04).

刘晨,王凯,王业飞,周文胜.针对A油田的抗温、抗盐聚合物/表面活性剂二元复合驱油体系研究[J].岩性油气藏,2017(03).

陈金凤,李洁,张丽娟.大庆油田三元复合驱注入时机[J].大庆石油地质与开发,2015(05).

杨二龙,贾聚全,齐士琨,徐生婧,陈楠.海上稠油油田聚驱后二元复合驱注入时机与注入方式优选[J].油田化学,2015(02).

邹存友,于立君.中国水驱砂岩油田含水与采出程度的量化关系[J].石油学报,2012(02).

李国.大庆油田聚合物驱后利用残余聚合物挖潜剩余油技术探索[J].油田化学,2010(02).

张超,叶仲斌,施雷庭,赵文森,张卓.疏水缔合聚合物建立流动阻力机理研究[J].中国海上油气,2007(04).

隋军,廖广志,牛金刚.大庆油田聚合物驱油动态特征及驱油效果影响因素分析[J].大庆石油地质与开发,1999(05).

俞启泰.几种重要水驱特征曲线的油水渗流特征[J].石油学报,1999(01).

万吉业.水驱油田的驱替系列及其应用(Ⅱ)[J].石油勘探与开发,1983(01).

张鹏.缔合型聚合物在孔隙介质中的流动性质与驱油能力研究[D].中国石油大学（华东）,2013(06).